4XWC – Explosion Proof Submersible Sewage Pump

Bell & Gossett : Wastewater Pumps & Packages : Sewage Wastewater Pumps

4XWC – Explosion Proof Submersible Sewage Pump

Features and Benefits

  • Impeller: Cast iron, two vane closed design for high efficiency and maximum wear life. Balanced for smooth operation.
  • Bronze Wear Ring: Replaceable to renew the running clearances and efficiencies to original conditions. Leakage diminishes considerably.
  • Casing: Heavy duty cast iron, volute type for maximum efficiency. 4″ ANSI class 125 cast iron flanged. Adaptable to slide rail system mounting.
  • Dual Mechanical Seals: Function independently for maximum motor protection. The failure of one seal does not affect the operation of the second. The upper seal uses carbon rotating and ni-resist stationary face materials. The lower seal uses carbon rotating and ceramic stationary face materials as s
  • Seal Sensor Probe: The pump has a moisture detection probe located in an oil filled seal chamber. If pumpage should leak past the lower seal it indicates to pump control panel a fault has occurred. Requires an Optional Seal Fail or Moisture Detection Circuit in the control panel.
  • Designed for Continuous Operation: Continuous duty submerged condition in water that is 40°C or below. Maximum runtime with pump unsubmerged for 71/2-15 HP is 1 hour and for 20-30 HP is 15 minutes. Motor is suitable for 10 starts per hour.
  • Bearings: Double row angular contact thrust bearing on 250TYS frame and single row deep groove thrust bearing on 210TY frame pumps.
  • Impeller Mounting Screw: 300 series stainless steel with antirotational locking patch.
  • Castings: All iron castings are ASTM A48 class 30 grey iron. Optional bronze impeller is ASTM B584 C87500 silicon bronze.

General Selection Tools:

  • ESP-PLUS for B&G Centrifugal Pumps, Booster Pumps, Pump Accessories, and Air Separator
  • ESP-PARTS for replacement parts selection
  • ESP-TANKS for replacement parts selection
  • CAD Drawings for 2D and 3D dimensional drawings in many formats

Heat Exchanger Product Selection

Steam + Water Pressure Reducing Values

Sizing Tools:

Report Bugs/Request Enhancements
Please email the following address to report issues and request enhancements: ebusiness.support@xyleminc.com

Consult your local Bell & Gossett Representative for additional assistance.

Regional Office:

Byblos Bank Center 1st Floor
Baabda Main Street
Lebanon
Tel.: +961-5-920401

Search below to find your local distributor. If there is no location found, please contact our regional office for more information.

Find your local distributor
Country