Hoffman Specialty Steam Vents

Bell & Gossett : Steam Specialties : Vents

Model 4A Part No.401413 Air Valve (non-vacuum)

  • Float-type thermostatic vent
  • For residential or small one-pipe or two-pipe systems
  • Single non-adjustable port
  • 1/2 NPT female and 3/4  NPT male straight shank
  • Install 6-10? (150-250mm) above horizontal return and 18? (450mm) above the boiler water line
  • Maximum operating pressure 2 psig (0.13 bar)*
  • Maximum pressure 10 psig (0.7 bar)

Model 75 Part No. 401434 75H Part No. 401437 Air Valve (non-vacuum)

  • Float-type thermostatic vent
  • For medium and large systems
  • Single non-adjustable port
  • 1/2 NPT female and 3/4 NPT male straight shank
  • Maximum operating pressure*
    • Model 75 3 psig (0.2 bar)
    • Model 75H 10 psig (0.7 bar)
  • Maximum pressure 15 psig (1.0 bar)

Model 76 Part No. 401431 Vacuum Valve

  • Float-type themostatic vent
  • For medium and large one-pipe vacuum systems • Single non-adjustable port
  • 1/2 NPT female and 3/4 NPT male straight shank
  • Install 6-10? (150-250mm) above horizontal return and 8? (450mm) above the boiler water line
  • Maximum operating pressure 3 psig (0.2 bar)
  • Maximum pressure 15 psig (1.0 bar)

Special Steam Vents

  • Model 3 Part No. 401419 Steam Air Line Valve
  • Thermostatic vent (no float)
  • For Air Line or Paul Systems
  • Inlet 1/8 NPT, outlet 1/4 NPT
  • Maximum operating pressure 25 psig (1.7 bar)* to vacuum
  • Maximum pressure 25 psig (1.7 bar)

Model 4 Part No. 401416 Quick Valve

  • Thermostatic air vent
  • For steam systems and process equipment
  • Operates on temperature change only; does not close against water
  • Must be installed 6-10? (150-250mm) above horizontal return and 18? (450mm) above the boiler water line
  • 1/2 NPT female and 3/4 NPT male straight shank
  • Maximum operating pressure 25 psig (1.7 bar)*
  • Maximum pressure 25 psig (1.7 bar)

Model 74 Part No. 401428 Steam Unit Heater Air Valve

  • Float-type thermostatic vent • Single non-adjustable port
  • 1/2 NPT female and 3/4 NPT male straight shank
  • Install 6-10? (150-250mm) above horizontal return and 18? (450mm) above the boiler water line
  • Maximum operating pressure 35 psig (2.4 bar)*
  • Maximum pressure 35 psig (2.4 bar)

Guidelines

    Catalog Pages

      General Selection Tools:

      • ESP-PLUS for B&G Centrifugal Pumps, Booster Pumps, Pump Accessories, and Air Separator
      • ESP-PARTS for replacement parts selection
      • ESP-TANKS for replacement parts selection
      • CAD Drawings for 2D and 3D dimensional drawings in many formats

      Heat Exchanger Product Selection

      Steam + Water Pressure Reducing Values

      Sizing Tools:

      Report Bugs/Request Enhancements
      Please email the following address to report issues and request enhancements: ebusiness.support@xyleminc.com

      Consult your local Bell & Gossett Representative for additional assistance.

      Regional Office:

      Byblos Bank Center 1st Floor
      Baabda Main Street
      Lebanon
      Tel.: +961-5-920401

      Search below to find your local distributor. If there is no location found, please contact our regional office for more information.

      Find your local distributor
      Country